FINAL-FINAL.jpgQQQQ copy.gif

    Home |  Testing Services  |  Technical Information  |  Consulting  |  Customer Services  |  Careers  |  Contact Us   

 

 

Table 7.jpg

 

TOYS

CHILDREN'S PRODUCTS

CHEMICAL

ELECTRICAL AND ELECTRONIC

HARDLINES

SOFTLINES

REGULATIONS OF DIFFERENT     COUNTRIES

 

 

 

   Ask online_red copy_revised.jpg

 

 

 

Corrugated / Paper Analysis Testing

 

Physical property tests on corrugated or paper materials are listed below. All tests are performed as per TAPPI and/or ASTM testing standards.

§         Pin Adhesion

§         Ring Crush

§         Tensile Test

§         Taber Stiffness

§         Internal Bond

§         Basis Weight (materials analysis)

§         Box Compression Test

§         Edge Crush Test (ECT)

§         Caliper

§         Cobb Size (2 minute and 30 minute)

§         Mullen (bursting strength)

§         G.E. Puncture Test

§         Coefficient of Friction

§         Flat Crush

§         Box Mfg Joint Tear Test

§         Concora Test

 

 

Testing for corrugated board

 

Tests on corrugated board are listed below.

·      Abrasion Taber (T 426)

·      Board Analysis (T 410)

·      Board Quality Analysis (T 410)

·      Board Thickness (T 411)

·      Boat Method (T 819)

·      Burst (Mullen) (T 807,810)

·      Cobb

·      Coefficient of Friction (T 815)

·      Construction

·      Edge Crush Test (T 811)

·      Flat Crush (T 825)

·      Float Curl (T 832)

·      Manufacturer’s Joint Tensile Test (T 813)

·      Moisture Content at Equilibrium (T 412)

·      Pin Adhesion (T 821)

·      Score Quality Test (T 829)

·      Tear Resistance (T 414)

·      Tensile Strength (T 494)

·      Thickness (T411)

·      Water Absorption of Corrugated Medium

·      Water Drop (T 835)

 

Corrugated Component Testing

 

Basis Weight Testing: TIS 0308-01 Soak Method is the procedure used to analyze a specimen of corrugated fiberboard to determine the basis weights and calipers of the combined board and its components.

Cobb Testing: ISO 535:1991(E) specifies a method of determining the water absorptiveness of corrugated fiberboard under standard conditions.

Mullen Burst Test: T810 om-98 is the procedure used to measure the bursting strength of singlewall and doublewall corrugated and solid fiberboard.

T 839 pm-95: It is the procedure used to determine the edgewise compressive strength, parallel to the flutes, of a short column of singlewall or doublewall fiberboard.

Pin Adhesion Testing: T 821 om-96 is used to measure the force required to separate corrugated board between the flute tips of corrugated medium and its linerboard facings.

 

 

 

 

© 2005, 2010   Professional Testing & Consulting Ltd.  All rights reserved.