编号
|
中文名称
|
英文名称
|
Standard Specification
for HFC-125 (Pentafluoroethane, C2HF5)
|
HF
|
)Standard Specification
for HFC-125 (Pentafluoroethane, C2HF5)>
|
0-1-2001伞齿轮负载容量的计算.说明及一般影响因素Calculation
of load capacity of bevel gears - Calculation of load capacity of bevel gears
- Introduction and general influence factors>
|
0-1-2001伞齿轮负载容量的计算.说明及一般影响因素Calculation
of load capacity of bevel gears - Calculation of load capacity of bevel gears
- Introduction and general influence factors>
|
1030
|
3-203-1996工业自动化系统和集成电路.产品数据表示和信息交流.第203部分:利用协议:性位控制设计Industrial automation systems and integration - Product data representation
and exchange - Application protocol - Configuration controlled design>
|
3-203-1996工业自动化系统和集成电路.产品数据表示和信息交流.第203部分:利用协议:性位控制设计Industrial automation systems and integration - Product data representation
and exchange - Application protocol - Configuration controlled design>
|
1030
|
3-31-1995工业自动化系统及集成.产品数据表示和交换.一致性试验的方法论和基本结构:一般概念Industrial
automation systems and integration - Product data representation and exchange
- Conformance testing methodology and framework: general concepts>
|
3-31-1995工业自动化系统及集成.产品数据表示和交换.一致性试验的方法论和基本结构:一般概念Industrial
automation systems and integration - Product data representation and exchange
- Conformance testing methodology and framework: general concepts>
|
1030
|
3-32-1998工业自动化系统和集成电路.产品数据表示和交换.一致性测试方法和结构:实验室和试验人员的要求Industrial
automation systems and integration - Product data representation and exchange
- Conformance testing methodology and framework: Requirements on testi
|
3-32-1998工业自动化系统和集成电路.产品数据表示和交换.一致性测试方法和结构:实验室和试验人员的要求Industrial
automation systems and integration - Product data representation and exchange
- Conformance testing methodology and framework: Requirements on testing laboratories
and clients>
|
1030
|
3-44-1995工业自动化系统和集成.产品数据表示和信息交流.集成总资源:产品结构配置Industrial automation
systems and integration - Product data representation and exchange - Integrated
generic resources: Product structure configuration>
|
3-44-1995工业自动化系统和集成.产品数据表示和信息交流.集成总资源:产品结构配置Industrial automation
systems and integration - Product data representation and exchange - Integrated
generic resources: Product structure configuration>
|
1030
|
ANSI (NFPA)T 2.25.1
R 2-2005
|
气压传动.工业机械的系统标准.对ISO 4414-1998的补充.气压传动.与系统相关的一般规则
|
|
ANSI Z223.1/NFPA
54-2005
|
国家燃气规程(同ANSI/NFPA 54)
|
|
ANSI/(NFPA) T 2.12.1-1993
|
液力传动.系统和产品.测量平均稳定状态压力的方法
|
Hydraulic Fluid
Power - Systems and Products - Method of Measuring Average Steady-State Pressure
|
ANSI/(NFPA) T 2.12.10-1993
|
液力传动.系统和产品.常规测量,原理和公差
|
Hydraulic Fluid
Power - Systems and Products - Testing General Measurement, Principles, and
Tolerances
|
ANSI/(NFPA) T 2.13.1
R3-1998
|
工业液力传动系统耐火液体的使用规程
|
Use of Fire-Resistant
Fluids for Industrial Hydraulic Fluid Power Systems, Practice for the
|
ANSI/(NFPA) T 2.13.4-1994
|
信息报告.液压用液体的保存,维护和处置推荐规程
|
Information Report
- Recommendations for Conservation, Maintenance, and Disposal of Hydraulic Fluids
|
ANSI/(NFPA) T 2.13.5-1991
|
液力传动.工业系统.高水含量液体的操作规程
|
Hydraulic Fluid
Power - Industrial Systems - Practice for the Use of High Water Content Fluids
|
ANSI/(NFPA) T 2.13.7
R1-1997
|
液力传动.石油流体.总体调节
|
Hydraulic Fluid
Power - Petroleum Fluids - Prediction of Bulk Moduli
|
ANSI/(NFPA) T 2.13.8-1997
|
液力传动.耐火液体.定义,分类和试验
|
Hydraulic Fluid
Power - Fire Resistant Fluids - Definitions, Classifications, and Testing
|
ANSI/(NFPA) T 2.24.2-1997
|
液压动力系统.提高密封可信度的方法
|
Hydraulic Fluid
Power Systems - Methods to Improve Sealing Reliability
|
ANSI/(NFPA) T 2.30.1-1994
|
液压动力感应器选择的指南
|
Guide for Selection
of Fluid Power Pressure Transducers
|
ANSI/(NFPA) T 2.6.1
R2-2000
|
液动件.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动件的压力的碎裂压力额定值的方法
|
Fluid Power Components
- Method for Verifying the Fatigue and Establishing the Burst Pressure Ratings
of the Pressure Containing Envelope of a Metal Fluid Power Component
|
ANSI/(NFPA) T 2.9.11-1989
|
液力传动.系统中油样品颗粒含量的测定方法
|
Hydraulic Fluid
Power-Method of Determining the Particulate Count of an Oil Sample from a System
(Using Liquid Automatic Counters)
|
ANSI/(NFPA) T 2.9.14-1993
|
液力传动.液体污染.重力计方法对固体污染水平的测定
|
Hydraulic Fluid
Power - Fluid Contamination - Determination of Solid Contaminant Level by the
Gravimetric Method
|
ANSI/(NFPA) T 3.10.17-1995
|
有限寿命液体过滤压力/寿命比.检验压力过滤器受压力外壳的疲劳寿命比率和破损压力比率的方法
|
Finite Life Hydraulic
Filter Pressure/Life Rating - Method for Verifying the Fatigue Life Rating and
the Burst Pressure Rating of the Pressure Containing Envelope of a Spin-On
Hydraulic Filter
|
ANSI/(NFPA) T 3.10.4
R1-1991
|
液力传动.过滤器和分离器.图形符号补充
|
Hydraulic Fluid
Power - Filters and Separators - Graphic Symbols Supplement
|
ANSI/(NFPA) T 3.10.5.1
R2-2000
|
液压过滤器/分离器外壳.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动过滤器/分离器的压力的碎裂压力额定值的方法
|
|
ANSI/(NFPA) T 3.12.10
R2-2000
|
空气管路过滤器、调节器和/或润滑器.NFPA/T
2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动过滤器、调节器和/或润滑器的压力的碎裂压力额定值的方法
|
|
ANSI/(NFPA) T 3.12.3
R2-1991
|
气压液动.压力调节器.工业类型
|
Pneumatic Fluid
Power - Pressure Regulator - Industrial Type
|
ANSI/(NFPA) T 3.16.2
R1-1997
|
液力传动.非整体工业贮液器的设计
|
Hydraulic Fluid
Power - Design for Nonintegral Industrial Reservoirs
|
ANSI/(NFPA) T 3.16.3
R1-1997
|
液力传动.非整体工业动力件的要求
|
Hydraulic Fluid
Power - Requirements for Nonintegral Industrial Power Units
|
ANSI/(NFPA) T 3.19.25-1998
|
信息报告.液动系统.密封装置.弹性密封体和排除装置的储存,处理和安装
|
Information Report
- Fluid Power Systems - Sealing Devices - Storage, Handling, and Installation
of Elastomeric Seals and Exclusion Devices
|
ANSI/(NFPA) T 3.19.32-1992
|
旋转轴盖型密封件.第2部分:词汇
|
Rotary Shaft Lip
Type Seals - Part 2: Vocabulary
|
ANSI/(NFPA) T 3.20.14-1990
|
气动快速反应耦合.塞尺寸
|
Pneumatic Quick-Action
Couplings - Plug Dimensions
|
ANSI/(NFPA) T 3.20.15-1991
|
液力传动.快速反应耦合.急流面
|
Hydraulic Fluid
Power - Quick-Action Coupling - Flush Face Type
|
ANSI/(NFPA) T 3.20.8
R2-2000
|
速动连接件.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动速动连接件的压力的碎裂压力额定值的方法
|
|
ANSI/(NFPA) T 3.21.16-1997
|
气压液动.气动产品的通信和标签
|
Pneumatic Fluid
Power - Labeling and Communication of Pneumatic Products
|
ANSI/(NFPA) T 3.21.3-1990
|
气压液动.固定件的流动率试验过程和报告方法.
|
Pneumatic Fluid
Power - Flow Rating Test Procedure and Reporting Method - for Fixed Orifice
Components
|
ANSI/(NFPA) T 3.21.4
R2-2000
|
气动阀.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动气动阀的压力的碎裂压力额定值的方法
|
Pneumatic valve
- Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components
- Method for verifying the fatigue and establishing the burst pressure ratings
of the pressure containing envelope of a metal fluid power pneumatic valve
|
ANSI/(NFPA) T 3.21.8-1990
|
气压液动.反应时间的测量.直接控制阀门
|
Pneumatic Fluid
Power - Measurement of Response Time - Directional Control Valves
|
ANSI/(NFPA) T 3.28.9
R1-1989
|
液压动力系统和产品.移动部件流动控制.图解方法
|
Fluid Power Systems
and Products - Moving Parts Fluid Controls - Method of Diagramming
|
ANSI/(NFPA) T 3.29.2
R2-2000
|
压力开关.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动压力开关的压力的碎裂压力额定值的方法
|
Pressure switch
- Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components
- Method for verifying the fatigue and establishing the burst pressure ratings
of the pressure containing envelope of a metal fluid power pressure switch
|
ANSI/(NFPA) T 3.4.7
R2-2000
|
蓄能器.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动蓄能器的压力的碎裂压力额定值的方法
|
Accumulator - Pressure
rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for
verifying the fatigue and establishing the burst pressure ratings of the pressure
containing envelope of a metal fluid power accumulator
|
ANSI/(NFPA) T 3.5.14
R1-1997
|
液力传动.直接控制阀门.分界特性的测定方法
|
Hydraulic Fluid
Power - Directional Control Valve - Method for Determining the Metering Characteristics
|
ANSI/(NFPA) T 3.5.26
R2-2000
|
液压阀.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动液压阀的压力的碎裂压力额定值的方法
|
Hydraulic valve
- Pressure rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components
- Method for verifying the fatigue and establishing the burst pressure ratings
of the pressure containing envelope of a metal fluid power hydraulic valve
|
ANSI/(NFPA) T 3.5.28
R1-1997
|
液力传动.阀门.压力不同的流量特性.测量和记录方法
|
Hydraulic Fluid
Power - Valves - Pressure Differential-Flow Characteristic - Method of Measuring
and Recording
|
ANSI/(NFPA) T 3.5.45-1996
|
液力传动.两孔滑动盒式阀门.容量
|
Hydraulic Fluid
Power - Two-Port Slip-In Cartridge Valves - Cavities (Technically equivalent
to ISO 7368: 1989)
|
ANSI/(NFPA) T 3.5.46-1990
|
液力传动.阀门.压力释放固定接口
|
Hydraulic Fluid
Power - Valves - Pressure Relief Mounting Interface
|
ANSI/(NFPA) T 3.6.29
R2-2000
|
连结杆或螺栓缸.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的连结杆或螺栓缸的压力的碎裂压力额定值的方法
|
|
ANSI/(NFPA) T 3.6.31
R2-2000
|
伸缩缸和无螺栓端口结构缸.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动伸缩缸和无螺栓端口液压缸的压力的碎裂压力额定值的方法
|
|
ANSI/(NFPA) T 3.6.37-1991
|
液力传动.气缸.屈曲负载的测定方法
|
Hydraulic Fluid
Power - Cylinders - Method for Determining the Buckling Load
|
ANSI/(NFPA) T 3.6.54
R1-1997
|
液力传动.气缸孔.SAE直螺纹O形环和四螺栓法兰孔.ISO直螺纹O形环和四螺栓法兰孔.重载和轻载四方头接棒气缸
|
Hydraulic Fluid
Power - Cylinder Ports - SAE Straight Thread O-Ring and Four-Bolt Flange Ports
- ISO Straight Thread O-Ring and Four-Bolt Flange Ports - Heavy-Duty and Light-Duty
Square Head Tie Rod Cylinders
|
ANSI/(NFPA) T 3.6.59-1993
|
液力传动.气缸.缓冲性能
|
Hydraulic Fluid
Power - Cylinders - Cushion Performance
|
ANSI/(NFPA) T 3.6.7
R2-1996
|
流体动力系统和产品.正方形头气缸,固定尺寸
|
Fluid Power Systems
and Products - Square Head Industrial Cylinders - Mounting Dimensions
|
ANSI/(NFPA) T 3.9.17
R2-1997
|
液力传动.无源替代泵.马达和整体传输.基本性能数据的试验和表示方法
|
Hydraulic Fluid
Power - Positive Displacement Pumps, Motors and Integral Transmissions - Method
of Testing and Presenting Basic Performance Data
|
ANSI/(NFPA) T 3.9.2
R3-1998
|
液力传动.定点替代泵和马达.固定法兰和轴末端的识别编码和尺寸
|
Hydraulic Fluid
Power - Positive Displacement Pumps and Motors - Dimensions and Identification
Code for Mounting Flanges and Shaft Ends
|
ANSI/(NFPA) T 3.9.20-1992
|
液力传动.泵.压力补偿泵的基本性能数据的表示和试验方法
|
Hydraulic Fluid
Power - Pumps - Method of Testing and Presenting Basic Performance Data for
Pressure Compensated Pumps
|
ANSI/(NFPA) T 3.9.22
R2-2000
|
泵/电动机.NFPA/T 2.6.1 R2-2000补充件:液动件压力额定值.检验疲劳和确定含金属外壳的液动泵和电动机的压力的碎裂压力额定值的方法
|
Pump/motor - Pressure
rating supplement to NFPA/T2.6.1 R2-2000, Fluid power components - Method for
verifying the fatigue and establishing the burst pressure ratings of the pressure
containing envelope of a metal fluid power pump and motor
|
ANSI/(NFPA) T 3.9.31-2-1994
|
液力传动.马达特性的测定.第2部分:起动性
|
Hydraulic Fluid
Power - Determination of Characteristics of Motors - Part 2: Startability
|
ANSI/(NFPA) T 3.9.33-1997
|
液力传动.泵.负载感应泵基本性能数据的表示和试验方法
|
Hydraulic Fluid
Power - Pumps - Method of Testing and Presenting Basic Performance Data for
Load Sensing Pumps
|
ANSI/(NFPA) T3.19.25
R1-2004
|
信息报告.液压系统.密封装置.弹性密封件和隔离装置的存储、搬运和安装
|
|
ANSI/(NFPA/JIC)
T 2.24.1-1991
|
液力传动.固定工业机械的系统标准
|
Hydraulic Fluid
Power - Systems Standard for Stationary Industrial Machinery
|
ANSI/IEEE 802.16/Conformance01-2003
|
与IEEE 802.16相一致的标准.第1部分:10-66GHz无线MAN-SC空中接口用协议实现一致性声明(PICS)形式表
|
(Standard for Conformance
to IEEE Standard 802.16 - Part 1: Protocol Implementation Conformance Statement
(PICS) Proforma for 10-66 GHz WirelessMAN-SC Air Interface )
|
ANSI/IEEE 802.16/Conformance03-2004
|
IEEE 802.16的一致性标准.第3部分:10-66
GHz MAN-SCT无线空中接口的无线电一致性试验(RCT)
|
|
ANSI/NFPA 1-2003
|
防火符号
|
(Fire Prevention
Code )
|
ANSI/NFPA 1-2006
|
统一消防规范T
|
|
ANSI/NFPA 10-1998
|
便携式灭火器
|
Portable Fire Extinguishers
|
ANSI/NFPA 10-2002
|
便携式灭火器
|
(Portable Fire Extinguishers
)
|
ANSI/NFPA 1000-1994
|
消防部门职业资格鉴定计划的认证和认可
|
Certification and
Accreditation of Fire Service Professional Qualifications Programs
|
ANSI/NFPA 1000-2006
|
消防部门职业资格认可和认证体系标准
|
|
ANSI/NFPA 1001-1997
|
救火专业资格
|
Fire Fighter Professional
Qualifications
|
ANSI/NFPA 1001-2002
|
消防人员的专业资格
|
(Fire Fighter Professional
Qualifications )
|
ANSI/NFPA 1002-1993
|
消防设备操作者的专业资格鉴定
|
Fire Apparatus Driver/Operator
Professional Qualifications
|
ANSI/NFPA 1002-2003
|
消防设备操作者的职业资格鉴定
|
(Fire Apparatus
Driver/Operator Professional Qualifications )
|
ANSI/NFPA 1003-2005
|
机场消防队员专业资格鉴定
|
|
ANSI/NFPA 1006-2003
|
援救人员专业资格标准
|
(Standard for Rescue
Technician Professional Qualifications )
|
ANSI/NFPA 101-2003
|
建筑物和结构对于火中逃生的安全性
|
(Safety to Life
from Fire in Buildings and Structures )
|
ANSI/NFPA 101-2006
|
生命安全性编码器
|
|
ANSI/NFPA 101A-1998
|
人身安全保护选择方法指南
|
Guide On Alternative
Approaches to Life Safety
|
ANSI/NFPA 101A-2004
|
人身安全保护选择方法指南
|
|
ANSI/NFPA 101B-1998
|
出口编码方法
|
Means of Egress
Code
|
ANSI/NFPA 101B-2002
|
出口编码方法
|
(Means of Egress
Code )
|
ANSI/NFPA 101M-1995
|
人身安全保护选择方法
|
Alternative Approaches
to Life Safety
|
ANSI/NFPA 102-1995
|
装配座椅、帐蓬和充气结构
|
Assembly Seating,
Tents, and Air-Supported Structures
|
ANSI/NFPA 1021-1997
|
救火官员专业资格
|
Fire Officer Professional
Qualifications
|
ANSI/NFPA 1021-2003
|
消防人员职业资格
|
(Fire Officer Professional
Qualifications )
|
ANSI/NFPA 1031-1993
|
消防检查员的专业资格鉴定
|
Professional Qualifications
for Fire Inspector
|
ANSI/NFPA 1031-2003
|
消防检查员的职业资格鉴定
|
(Professional Qualifications
for Fire Inspector )
|
ANSI/NFPA 1033-1993
|
消防审查员的专业资格鉴定
|
Professional Qualifications
for Fire Investigator
|
ANSI/NFPA 1033-2003
|
消防审查员的职业资格鉴定
|
(Professional Qualifications
for Fire Investigator )
|
ANSI/NFPA 1035-2005
|
公共消防培训员专业资格鉴定
|
|
ANSI/NFPA 1041-2002
|
消防指挥员的专业资格鉴定
|
Professional Qualifications
for Fire Service Instructor
|
ANSI/NFPA 105-2003
|
防烟门和通风门组件的安装
|
(Smoke and Draft-Control
Door Assemblies, Installation of )
|
ANSI/NFPA 1051-2002
|
荒地防火人员的专业资格鉴定
|
Wildland Fire Management
Personnel Professional Qualifications
|
ANSI/NFPA 1061-2002
|
公共安全远程通讯仪的专业资格鉴定标准
|
Standard for Professional
Qualifications for Public Safety Telecommunicator
|
ANSI/NFPA 1071-2000
|
紧急车辆技术专业资质标准
|
Standard for Emergency
Vehicle Technician Professional Qualifications
|
ANSI/NFPA 1071-2006
|
急救车技术人员职业资格标准
|
|
ANSI/NFPA 1081-2001
|
工业消防人员职业资格鉴定标准
|
Standard for Industrial
Fire Brigade Member Professional Qualifications
|
ANSI/NFPA 11-1998
|
低膨胀泡沫
|
Low-Expansion Foam
|
ANSI/NFPA 11-2002
|
低膨胀泡沫
|
(Low-Expansion Foam
)
|
ANSI/NFPA 11-2005
|
低、中、高膨胀泡沫系统标准
|
|
ANSI/NFPA 110-2002
|
应急和备用电源系统
|
Emergency and Standby
Power Systems
|
ANSI/NFPA 110-2005
|
应急和备用电源系统
|
|
ANSI/NFPA 111-1996
|
储蓄电能和备用的电力系统
|
Stored Electrical
Energy Emergency and Standby Power Systems
|
ANSI/NFPA 111-2005
|
储蓄电能应急和备用电源系统
|
|
ANSI/NFPA 1122-1997
|
无人驾驶火箭
|
Unmanned Rockets
|
ANSI/NFPA 1122-2002
|
无人驾驶火箭
|
(Unmanned Rockets
)
|
ANSI/NFPA 1123-1995
|
焰火的公开表演
|
Public Display of
Fireworks
|
ANSI/NFPA 1123-2006
|
焰火演示规范
|
|
ANSI/NFPA 1124-1995
|
焰火的制造、运输和储存
|
Manufacture, Transportation,
and Storage of Fireworks
|
ANSI/NFPA 1124-2003
|
烟火的制造、运输和储存
|
(Manufacture, Transportation,
and Storage of Fireworks )
|
ANSI/NFPA 1124-2006
|
焰火和焰火制品的制造、运输、储存和零售规范
|
|
ANSI/NFPA 1125-2001
|
火箭发动机样机的制造
|
Manufacture of Model
Rocket Engines
|
ANSI/NFPA 1126-1996
|
密集观众前的烟火施放
|
Pyrotechnics before
a Proximate Audience
|
ANSI/NFPA 1126-2006
|
临近观众前的焰火制品的燃放标准
|
|
ANSI/NFPA 1127-1995
|
高功率火箭
|
High Power Rocketry
|
ANSI/NFPA 1127-2002
|
高功率火箭
|
(High Power Rocketry
)
|
ANSI/NFPA 1141-1990
|
楼群的防火方案
|
Fire Protection
in Planned Building Groups
|
ANSI/NFPA 1141-2003
|
楼群的防火方案
|
(Fire Protection
in Planned Building Groups )
|
ANSI/NFPA 1144-2002
|
从森林火灾中保护生命和财产
|
(Protection of Life
and Property from Wildfire )
|
ANSI/NFPA 1145-2000
|
在手工救火中A级泡沫使用指南
|
Guide for the Use
of Class A Foams in Manual Structural Fire Fighting
|
ANSI/NFPA 1145-2006
|
在人工建筑救火中A级泡沫的使用指南
|
|
ANSI/NFPA 115-2003
|
激光器防火
|
(Laser Fire Protection
)
|
ANSI/NFPA 1150-2004
|
化学物质及野外消防
|
|