编号
|
中文名称
|
英文名称
|
ANSI/ASTM A 1005/A
1005M-2000
|
黑色的,水平末端的径向和水平接缝的钢制线管规范.双埋头弧焊
|
Specification for
Steel Line Pipe, Black, Plain End, Logitudinal and Helical Seam. Double Submerged-Arc
Welded
|
ANSI/ASTM A 1006-2000
|
激光束焊接平头无镀层钢管线规范
|
Specification for
Steel Line Pipe Black, Plain End, Laser Beam Welded
|
ANSI/ASTM A 1007-2000
|
碳钢线和线绳规范
|
Specification for
Carbon Steel Wire for Wire Rope
|
ANSI/ASTM A 1009-2000
|
高频(10KHz-1MHz)动力传输和过滤导体应用的软磁化锰锌铁芯材料规范
|
Specification for
Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10KHz to 1MHz)
Power Transformer and Filter Inductor Applications
|
ANSI/ASTM A 1013-2000
|
在控制的温度下高频软磁化芯件芯损失的试验方法
|
Test Method for
High Frequency (10 kHz - 1 MHz) Core Loss of Soft Magnetic Core Components at
Controlled Temperatures using the Voltmeter-Ammeter-Wattmeter Method
|
ANSI/ASTM A 1014-2000
|
高温用的沉淀硬化螺栓规范
|
Specification for
a Precipitation-Hardening Bolting Material (UNS NO7718) for High Temperature
Service
|
ANSI/ASTM A 1015-2001
|
卫生用的管状产品指南
|
Guide for Videoborescoping
of Tubular Products for Sanitary Applications
|
ANSI/ASTM A 1016/A
1016M-2002
|
铁素体钢、奥氏体钢和不锈钢钢管的一般要求规范
|
Specification for
General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless
Steel Tubes
|
ANSI/ASTM A 1017-2001
|
铬钼钨合金钢制压力容器板材规范
|
Specification for
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
|
ANSI/ASTM A 1018-2001
|
片钢和带钢、重厚度卷材、热轧、高强度低合金结构碳钢以及改良可模塑性高强度钶或钒低合金钢规范
|
Specification for
Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural,
High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy
With Improved Formability
|
ANSI/ASTM A 1020-2001
|
热交换和冷凝用的锅炉,超级加热炉熔焊,碳和碳锰钢管规范
|
Specification for
Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater,
Heat Exchanger and Condenser Applications
|
ANSI/ASTM A 1022-2001
|
混凝土加筋用刻痕和普通不锈钢丝和焊接钢丝规范
|
Specification for
Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
|
ANSI/ASTM A 125-2001
|
热处理螺旋形钢弹簧规范
|
Specification for
Steel Springs, Helical, Heat-Treated
|
ANSI/ASTM A 131/A
131M-2001
|
船用结构钢规范
|
Specification for
Structural Steel for Ships
|
ANSI/ASTM A 134-1996
|
电熔(电弧)焊钢管(NPS为16英寸和16英寸以上)的规范
|
Specification for
Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes Nps 16 and Over)
|
ANSI/ASTM A 144-1996
|
钨铁合金规范
|
Specification for
Ferrotungsten
|
ANSI/ASTM A 167-1999
|
不锈钢和耐热铬镍钢板、薄钢板及带材规范
|
Specification for
Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
ANSI/ASTM A 183-1998
|
钢轨用碳素钢螺栓和螺母规范
|
Specification for
Carbon Steel Track Bolts and Nuts
|
ANSI/ASTM A 185-2001
|
普通的混凝土加筋用焊接钢丝网规范
|
Specification for
Steel Welded Wire Fabric, Plain, for Concrete Reinforcement
|
ANSI/ASTM A 2-1996
|
普通型、带槽和防护型碳素钢平底轨规范
|
Specification for
Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
|
ANSI/ASTM A 203-1996
|
压力容器用镍合金钢板规范
|
Specification for
Pressure Vessel Plates, Alloy Steel, Nickel
|
ANSI/ASTM A 210-1996
|
锅炉和过热器用无缝中碳素钢管规范
|
Specification for
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
|
ANSI/ASTM A 214-1996
|
热交换器与冷凝器用电阻焊接碳素钢管规范
|
Specification for
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
ANSI/ASTM A 226-1996
|
高压锅炉与过热器用电阻焊接碳素钢管规范
|
Specification for
Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure
Service
|
ANSI/ASTM A 227/A
227M-1999
|
机械弹簧用冷拉钢丝规范
|
Specification for
Steel Wire, Cold-Drawn for Mechanical Springs
|
ANSI/ASTM A 229-1996
|
机械弹簧用油回火钢丝规范
|
Specification for
Steel Wire, Oil-Tempered for Mechanical Springs
|
ANSI/ASTM A 230-1996
|
阀门用油回火优质碳素弹簧钢丝规范
|
Specification for
Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
ANSI/ASTM A 231-1996
|
铬钒合金钢弹簧丝规范
|
Specification for
Chromium-Vanadium Alloy Steel Spring Wire
|
ANSI/ASTM A 232/A
232M-1999
|
阀弹簧络-钒合金钢丝的规范
|
Specification for
Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
|
ANSI/ASTM A 252-1998
|
焊接钢和无缝钢管桩规范
|
Specification for
Welded and Seamless Steel Pipe Piles
|
ANSI/ASTM A 254-1996
|
铜焊钢管规范
|
Specification for
Copper-Brazed Steel Tubing
|
ANSI/ASTM A 29-1996
|
热锻及冷加工碳素钢和合金钢棒一般要求的规范
|
Specification for
Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements
for
|
ANSI/ASTM A 299-1996
|
压力容器用锰硅碳钢板规范
|
Specification for
Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
|
ANSI/ASTM A 302-1996
|
压力容器用锰钼和锰钼镍合金钢板规范
|
Specification for
Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
ANSI/ASTM A 304-1996
|
有端部淬火硬性要求的碳素钢及合金钢棒规范
|
Specification for
Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
|
ANSI/ASTM A 314-1996
|
锻造用不锈钢坯及钢棒规范
|
Specification for
Stainless Steel Billets and Bars for Forging
|
ANSI/ASTM A 321-1996
|
经淬火和回火的碳素钢棒规范
|
Specification for
Steel Bars, Carbon, Quenched and Tempered
|
ANSI/ASTM A 322-1996
|
标准级合金钢棒规范
|
Specification for
Steel Bars, Alloy, Standard Grades
|
ANSI/ASTM A 34-2001
|
磁性材料的采购检验和抽样实施规范
|
Practice for Procurement
Testing and Sampling of Magnetic Materials
|
ANSI/ASTM A 340-2001
|
与磁化试验有关的符号和定义的术语
|
Terminology of Symbols
and Definitions Relating to Magnetic Testing
|
ANSI/ASTM A 343-1997
|
在电力频率下用瓦特计-安培计-伏特计法和25厘米艾普斯亭(EPSTEIN)机架测定材料交流电磁性能的试验方法
|
Test Method for
Alternating-Current Magnetic Properties of Materials at Power Frequencies Using
Wattmeter-Ammeter-Voltmeter Method and 25-Cm Epstein Test Frame
|
ANSI/ASTM A 351/A
351M-2000
|
压力容器部件用奥氏体、奥氏体铁铸件规范
|
Specification for
Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing
Parts
|
ANSI/ASTM A 370-2001
|
钢制品机械试验的试验方法和定义
|
Test Methods and
Definitions for Mechanical Testing of Steel Products
|
ANSI/ASTM A 381-1996
|
高压输送系统用金属弧焊钢管规范
|
Specification for
Metal-Arc-Welded Steel Pipe for Use with High-Pressure Transmission Systems
|
ANSI/ASTM A 383-1996
|
出口及一般工业用未经处理的碳素钢铁路轮轴规范
|
Specification for
Axles, Railway, Carbon Steel, Untreated for Export and General Industrial Use
|
ANSI/ASTM A 427-1996
|
冷轧和热轧用锻制合金钢辊规范
|
Specification for
Wrought Alloy Steel Rolls for Cold and Hot Reduction
|
ANSI/ASTM A 450-1996
|
碳素钢管、铁素体合金钢管及奥氏体合金钢管规范
|
Specification for
General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel
Tubes
|
ANSI/ASTM A 478-1996
|
铬镍不锈钢和耐热钢制的编织钢丝规范
|
Specification for
Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting Wire
|
ANSI/ASTM A 496-2001
|
混凝土加筋用刻痕钢丝的规范
|
Specification for
Steel Wire, Deformed, for Concrete Reinforcement
|
ANSI/ASTM A 497-2001
|
混凝土加筋用刻痕焊接钢丝网规范
|
Specification for
Steel Welded Wire Fabric, Deformed, for Concrete Reinforcement
|
ANSI/ASTM A 498-1998
|
带整体散热片的无缝和焊接碳钢、铁素体和奥氏体合金钢热交换管规范
|
Specification for
Seamless and Welded Carbon, Ferritic, and Austenitic Alloy Steel Heat-Exchanger
Tubes with Integralfins
|
ANSI/ASTM A 503/A
503M-2001
|
大的锻制曲轴超声检查规范
|
Specification for
Ultrasonic Examination of Large Forged Crankshafts
|
ANSI/ASTM A 511-1996
|
无缝不锈钢机械管规范
|
Specification for
Seamless Stainless Steel Mechanical Tubing
|
ANSI/ASTM A 512-1996
|
冷拉对缝焊碳素钢机械管规范
|
Specification for
Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
|
ANSI/ASTM A 515-1996
|
中温及高温压力容器用碳素钢板规范
|
Specification for
Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature
Service
|
ANSI/ASTM A 519-1996
|
无缝碳素钢与合金钢机械管规范
|
Specification for
Seamless Carbon and Alloy Steel Mechanical Tubing
|
ANSI/ASTM A 521-1996
|
一般工业用闭式压模钢锻件规范
|
Specification for
Steel, Closed-Impression Die Forgings for General Industrial Use
|
ANSI/ASTM A 523-1996
|
高压管型电缆线路用平端无缝与电阻焊钢管规范
|
Specification for
Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure
Pipe-Type Cable Circuits
|
ANSI/ASTM A 524-1996
|
常温和低温用无缝碳素钢管规范
|
Specification for
Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
|
ANSI/ASTM A 555-1996
|
不锈钢丝和钢条一般要求的规范
|
Specification for
General Requirements for Stainless Steel Wire and Wire Rods
|
ANSI/ASTM A 556-1996
|
无缝冷拉碳素钢给水加热器管规范
|
Specification for
Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
|
ANSI/ASTM A 568/A
568M-2001
|
热轧和冷轧、高强度、低合金碳钢薄板材规范.一般要求
|
Specification for
Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,
General Requirements for
|
ANSI/ASTM A 575-1996
|
商品级碳素钢棒(M级)规范
|
Specification for
Steel Bars, Carbon, Merchant Quality, M-Grades
|
ANSI/ASTM A 587-1996
|
化学工业用电阻焊低碳钢管规范
|
Specification for
Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
|
ANSI/ASTM A 589-1996
|
水井用无缝和焊接碳素钢管规范
|
Specification for
Seamless and Welded Carbon Steel Water-Well Pipe
|
ANSI/ASTM A 623-2000
|
马口铁产品规范,一般要求
|
Specification for
Tin Mill Products, General Requirements
|
ANSI/ASTM A 627-1996
|
安全设备用均质不易加工的钢棒规范
|
Specification for
Homogeneous Tool-Resisting Steel Bars for Security Applications
|
ANSI/ASTM A 629-1996
|
安全设备用不易加工的扁钢棒和型材规范
|
Specification for
Tool-Resisting Steel Flat Bars and Shapes for Security Applications
|
ANSI/ASTM A 632-2001
|
一般应用的焊接的和无缝的奥氏体不锈钢规范
|
Specification for
Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General
Service
|
ANSI/ASTM A 633/A
633M-2001
|
标准化的高强度低合金结构钢板规范
|
Specification for
Normalized High-Strength Low-Alloy Structural Steel Plates
|
ANSI/ASTM A 635/A
635M-2001
|
热轧碳钢薄板、带钢和粗带钢卷规范
|
Specification for
Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled
|
ANSI/ASTM A 645/A
645M-1999
|
压力容器用经特殊处理的5%镍合金钢板规范
|
Specification for
Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
|
ANSI/ASTM A 660-1996
|
高温用离心铸造碳素钢管规范
|
Specification for
Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
|
ANSI/ASTM A 662-1996
|
中温和较低温压力容器用碳锰板规范
|
Specification for
Pressure Vessel Plates, Carbon-Manganese, for Moderate and Lower Temperature
Service
|
ANSI/ASTM A 668-1996
|
一般工业用碳素钢和合金钢锻件规范
|
Specification for
Steel Forgings, Carbon and Alloy, for General Industrial Use
|
ANSI/ASTM A 671-1996
|
常温和较低温用电熔焊钢管规范
|
Specification for
Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
|
ANSI/ASTM A 672-1996
|
中温高压设备用电熔焊钢管规范
|
Specification for
Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
|
ANSI/ASTM A 673-1996
|
结构钢冲击试验的取样程序规范
|
Specification for
Sampling Procedure for Impact Testing of Structural Steel
|
ANSI/ASTM A 689-1996
|
弹簧用碳素钢及合金钢棒的规范
|
Specification for
Carbon and Alloy Steel Bars for Springs
|
ANSI/ASTM A 693-1999
|
沉淀硬化不锈钢和耐热钢板、薄板和带材规范
|
Specification for
Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and
Strip
|
ANSI/ASTM A 695-1996
|
流体动力设备专用热锻碳素钢棒规范
|
Specification for
Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications
|
ANSI/ASTM A 698/A
698M-1997
|
在衰减交变磁场中磁屏蔽效果的试验方法
|
Test Method for
Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
|
ANSI/ASTM A 704-1996
|
混凝土加筋用焊接普通钢棒或杆的钢筋网的规范
|
Specification for
Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
|
ANSI/ASTM A 711-1996
|
钢锻件坯料规范
|
Specification for
Steel Forging Stock
|
ANSI/ASTM A 717/A
717M-2001
|
单条样品的表面绝缘耐性的试验方法
|
Test Method for
Surface Insulation Resistivity of Single-Strip Specimens
|
ANSI/ASTM A 719-1997
|
磁性材料层叠系数的试验方法
|
Test Method for
Lamination Factor of Magnetic Materials
|
ANSI/ASTM A 720-1997
|
无取向电工钢延展性的试验方法
|
Test Method for
Ductility of Nonoriented Electrical Steel
|
ANSI/ASTM A 724/A
724M-1999
|
压力容器用调制碳钢钢板规范.用于焊接的分层的压力容器
|
Specification for
Pressure Vessel Plates, Carbon Steel, Quenched and Tempered, for Welded Layered
Pressure Vessels
|
ANSI/ASTM A 734-1996
|
经淬火和回火的合金钢与高强度低合金钢压力容器板规范
|
Specification for
Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched
and Tempered
|
ANSI/ASTM A 735-1999
|
中温和较低温压力容器用低碳锰钼钶合金钢板规范
|
Specification for
Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel,
for Moderate and Lower Temperature Service
|
ANSI/ASTM A 737/A
737M-1999
|
压力容器用高强度低合金钢板规范
|
Specification for
Pressure Vessel Plates, High-Strength, Low-Alloy Steel
|
ANSI/ASTM A 749-1996
|
热轧碳素和高强度低合金钢带材一般要求的规范
|
Specification for
Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements
for
|
ANSI/ASTM A 750-1996
|
阻挡区域用钢制通风格栅的规范
|
Specification for
Steel Air Ventilating Grille Units for Detention Areas
|
ANSI/ASTM A 751-1996
|
钢制品化学分析的试验方法、操作和术语
|
Test Methods, Practices,
and Terminology for Chemical Analysis of Steel Products
|
ANSI/ASTM A 765/A
765M-2001
|
具有强制性韧度要求的碳钢和低合金钢压力容器部件的锻件规范
|
Specification for
Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory
Toughness Requirements
|
ANSI/ASTM A 768-1996
|
涡轮机转子及轴用经真空处理的12/T%铬合金钢锻件规范
|
Specification for
Vacuum-Treated 12/T% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
|
ANSI/ASTM A 773/A
773M-2001
|
D-C电子磁滞曲线记录仪的使用响铃和参数过程的材料的D-C磁化特性的试验方法
|
Test Method for
D-C Magnetic Properties of Materials Using Ring and Permeameter Procedures with
D-C Electronic Hysteresigraphs
|
ANSI/ASTM A 793-1996
|
不锈钢轧制楼板的规范
|
Specification for
Rolled Floor Plate, Stainless Steel
|
ANSI/ASTM A 794-1996
|
商品级冷轧薄钢板规范(最高含碳量为0.16%-0.25%)
|
Specification for
Steel, Sheet (Carbon 0.16% Maximum to 0.25% Maximum), Cold-Rolled, Commercial
Quality
|
ANSI/ASTM A 811-1997
|
粉末冶金技术制造的软磁铁零件规范
|
Specification for
Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques
|
ANSI/ASTM A 812-1996
|
多层焊接压力容器用热轧高强度低合金钢薄板规范
|
Specification for
Steel Sheet, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure
Vessels
|
ANSI/ASTM A 82-2001
|
钢筋混凝土用无节钢丝规范
|
Specification for
Steel Wire, Plain, for Concrete Reinforcement
|
ANSI/ASTM A 832/A
832M-1999
|
压力容器用铬-钼-钒合金钢板的规范
|
Specification for
Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
|
ANSI/ASTM A 833-1996
|
用比较硬度测试仪测量金属材料压痕硬度的实施规范
|
Practice for Indentation
Hardness of Metallic Materials by Comparison Hardness Testers
|
ANSI/ASTM A 837-1996
|
渗碳用合金钢锻件规范
|
Specification for
Steel Forgings, Alloy, for Carburizing Applications
|
ANSI/ASTM A 838-1997
|
继电器用易切铁素体不锈软磁合金规范
|
Specification for
Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications
|
ANSI/ASTM A 839-1997
|
软磁性磷铁粉末冶金技术零件规范
|
Specification for
Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
|
ANSI/ASTM A 848/A
848M-2001
|
低碳磁铁规范
|
Specification for
Low Carbon Magnetic Iron
|
ANSI/ASTM A 851-1996
|
高频感应焊接的未退火奥氏体钢冷凝器管规范
|
Specification for
High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes
|
ANSI/ASTM A 865-1996
|
钢管接头用黑色或镀锌焊接或无缝钢螺纹联接套筒规范
|
Specification for
Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless,
for Use in Steel Pipe Joints
|
ANSI/ASTM A 866-2001
|
防摩擦轴承用中碳钢规范
|
Specification for
Medium Carbon Anti-Friction Bearing Steel
|
ANSI/ASTM A 873-1996
|
压力容器用铬钼合金钢薄板和带材规范
|
Specification for
Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels
|
ANSI/ASTM A 880-1996
|
钢、不锈钢及相关合金的检验与检查组织和测试实验室评定准则的标准实施规程
|
Practice for Criteria
for Use in Evaluation of Testing Laboratories and Organizations for Examination
and Inspection of Steel, Stainless Steel, and Related Alloys
|
ANSI/ASTM A 882-1996
|
涂环氧树脂的七股预应力钢丝绳规范
|
Specification for
Epoxy Coated Seven-Wire Prestressing Steel Strand
|
ANSI/ASTM A 883-2001
|
非金属磁性材料铁磁共振行距和旋磁比率试验方法
|
Test Method for
Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic
Materials
|
ANSI/ASTM A 889-1997
|
在低感应条件下用万用表法和25厘米艾普斯亭(Epstein)框测定材料交流磁特性的试验方法
|
Test Method for
Alternating-Current Magnetic Properties of Materials at Low Inductions Using
the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
|
ANSI/ASTM A 900-2001
|
非晶磁性带材叠装系数的测试方法
|
Test Method for
Lamination Factor of Amorphous Magnetic Strip
|
ANSI/ASTM A 901-1997
|
半成品型非晶形磁芯合金规范
|
Specification for
Amorphous Magnetic Core Alloys Semi-Processed Types
|
ANSI/ASTM A 906/A
906M-1999
|
架空提升用合金钢链式吊索规范
|
Specification for
Alloy Steel Chain Slings for Overhead Lifting
|
ANSI/ASTM A 908-1996
|
不锈钢针管规范
|
Specification for
Stainless Steel Needle Tubing
|